Instruo Divkid ochd & øchd Expander Review and Guide
Updated: Nov 6
The Eurorack module ochd packs eight analogue triangle LFOs into 4HP, turning one knob and a handful of patch cables into a system-wide source of movement. Paired with its expander, it becomes a 24-output modulation ecosystem in just 8HP. Here is a full review of both modules.


Key Takeaways
The Instruo Divkid ochd is a 4HP eurorack module offering eight analogue triangle LFOs with a natural spread of rates, from audio-borderline speed at the top output to a 25-minute cycle at the lowest output. It works as a "set and forget" global modulation source that brings otherwise static patches to life.
The ochd expander ([ø]4²) adds 16 additional outputs and four new functions (unipolar LFOs, analogue diode logic, stochastic triggers, and 4-bit random voltages), turning ochd into a compact global frequency control hub.
The ochd draws around +12V 80 mA / −12V 80 mA; the expander adds only about +12V 5 mA / −12V 5 mA. Both together occupy just 8HP.
All LFOs in the ochd are unsynchronized to avoid predictable loops. Their phases drift organically, creating subtle modulation that adds life to static patches.
The combo suits beginners and advanced users alike, from small lunchbox systems to large performance cases, offering high modulation density for the size and price.
What Is Instruo ochd? (Overview and Design Intent)
The Instruo ochd is a compact 4HP Eurorack modulation module with eight independent analogue triangle LFOs, each free-running at a different speed to add organic movement and slow variation to a patch. Developed in collaboration with Ben “DivKid” Wilson, the Instruō team released it around 2019, and it quickly became a modern modulation staple because it packs a dense, immediate source of evolving CV into very little space.
The core idea is simple: eight analogue triangle LFOs stacked vertically, each slower than the one above it, with the eight rates arranged for optimum spread and chosen by ear rather than by mathematical formula. Patch any spare output into a filter cutoff, oscillator parameter, or effect control, and the whole patch starts breathing. The deliberate omission of clock sync keeps modulation from falling into obvious repetition, which is exactly why ochd appeals to beginners building a first small case, advanced Eurorack users, and ambient, generative, or live performers who want rich motion without menu diving or setup friction.
There is no menu, no screen, and no sync input. The front panel gives you a single rate control, a CV input with attenuverter, eight outputs, and a bipolar LED display for each LFO showing positive and negative swings, all in Instruo’s familiar black-and-gold layout. From there, this guide looks at how ochd and its expander work, the module’s technical behavior and specifications, where it fits in small and large systems, practical patching and workflow tips, and how it compares with alternative modulation sources so you can judge whether it is the right hands-on modulation engine for your rack.
Core Features of Instruo ochd
The ochd is an 8-output analog modulation module for Eurorack synthesizers. The eight outputs are arranged fastest at the top to slowest at the bottom. At the top output, the fastest LFO can reach approximately 160 Hz, crossing into the audio frequency range. At the bottom output, the slowest LFO can have a 25-minute cycle without CV applied, producing slow modulations that evolve over extended periods.
Each LFO's rate is controlled by a Rate knob that functions as a global frequency control. Turning this knob scales all eight LFOs together while preserving the relative spread between them. At moderate positions, the default ranges produce a mix of subtle wobble on faster outputs and glacial drifts on slower ones. The rate control controls the entire bank simultaneously, so a single gesture changes the character of your whole patch.
The CV input paired with its attenuverter track allows external voltage control over the global rate. Positive and negative control voltages can be used to modify the ochd's rate. A CV controllable global rate means envelopes, expression pedals, or other CV sources can speed up or slow down the entire bank. Using negative CV, the ochd can freeze its outputs mid-cycle for track-and-hold behavior, holding modulation values at whatever voltage the LFOs were producing when the stall occurred. This gives the module hold capabilities using negative CV to stall oscillator cores in place.
All LFOs in ochd are unsynchronized, operating as independent un synced free running analogue triangle LFO's. Because they are independent, their phases gradually shift relative to each other, creating complex interference patterns. The module's outputs create engaging complexity from simple triangle shapes. The outputs provide visual feedback with LED lights, making it easy to see which LFOs are active and where they sit in their cycle.
Technical Specifications and Power Requirements
The ochd occupies 4HP of rack width with approximately 32 mm module depth, fitting comfortably in most Eurorack cases including skiffs and shallow performance cases.
Specification | ochd | ochd Expander | Combined |
Width | 4 HP | 4 HP | 8 HP |
Depth | 32 mm | 32 mm | 32 mm |
+12V draw | 80 mA | 5 mA | ~85 mA |
−12V draw | 80 mA | 5 mA | ~85 mA |
5V draw | None | None | None |
Both modules follow standard Eurorack power conventions with a 10-pin ribbon cable. Red stripe alignment must be checked during installation. The module consumes 80 mA at both +12V and −12V, which is higher than many utility modules of similar size, so power budget planning matters in smaller cases.
Build quality is consistent with Instruo's manufacturing standards: robust jack sockets, solid knob feel, and printed panel markings that remain legible over years of use. Some users on ModularGrid forums have reported occasional output or connector issues after extended use, but these appear infrequent relative to total units sold. Users with small lunch box cases should budget 8HP and around 170 mA total (+12V and −12V combined per rail) if planning to run both ochd and the expander together.
Analogue LFO Behaviour and Global Frequency Control with CV Controllable Global Rate
When manufacturers describe LFOs as "all analogue," it means the waveforms contain no digital stepping or aliasing. The eight analogue triangle LFOs in ochd produce smooth, continuous voltage curves that respond fluidly to changes on the global frequency CV. The design aims for organic and human-like modulation rather than grid-locked precision.
The global frequency control behavior works by compressing or expanding the entire bank's speed simultaneously. Turning the knob clockwise pushes all LFOs faster; counterclockwise slows them down. The wide frequency range across all eight outputs remains proportionally spaced under global control, so lfo's will phase organically as the bank speeds up or slows down. Each LFO operates on an independent core, so while the global knob shifts the overall speed, no two outputs share identical timing.
The musical result of these slightly different core speeds is musical phasing: beating patterns, accidental polyrhythms, and slow evolving relationships that stay interesting over long time scales. Patches organically drifting through subtle variations feel alive in a way that precisely synced modulation cannot replicate.
Compared to a typical single multi-wave LFO, ochd trades per-channel wave shape complexity for sheer quantity and interrelated motion. You get simple triangle shapes from all eight oscillator cores rather than sine, square, saw, and exponential curves from a single source. The tradeoff is that eight different outputs running at different speeds produce far more system-wide animation than one complex wave from a single LFO ever could.
Using self-patching, the ochd can create complex and chaotic modulation shapes. Feed one output back into the CV input and the resulting waveforms take on exponential curves, stepped textures, and lfo self interaction patterns that go well beyond the module's default triangle character. This makes the module self patchable for complex and unpredictable results.
Patch Applications: Using ochd in Real Systems
Patching the outputs of ochd into various destinations allows for complex modulation across your entire system. Each of the øchd's outputs can modulate different parameters for a living sound. Here are several concrete scenarios.
Small system (60HP to 84HP): In a compact case, patch the fastest output to filter cutoff for a gentle shimmer, a mid-speed output to oscillator PWM or waveshaper fold amount, a slower output to reverb mix, and the slowest to stereo panning. Four cables, zero menu diving, and the whole patch gains organic animation that keeps things alive over minutes of listening.
Performance rig: Connect ochd outputs to drum voice parameters (decay, pitch, distortion), FX send levels, and delay feedback. Route a performance fader or expression pedal into the CV input so you can sweep all modulation speeds from near-frozen to frantic during a set. This turns øchd into a wider ranging performance tool that responds to physical gestures.
Generative ambient setup: Use the slowest LFOs to modulate quantizer scale selection, clock division ratios, envelope attack and decay times, and random generator probability. Over 10 to 20 minutes, harmonic content shifts without any manual input. The ochd can enhance patches by providing simultaneous modulation sources that keep generative compositions from stalling.
Non-obvious destinations: Try routing ochd to sample start points in a granular module, density parameters on a texture synthesizer, or control frequencies on spectral processors. These less common applications often yield the most organic little modulator moments, where modulation breathes life into sounds you thought were finished.
Introducing the ochd Expander ([ø]4²)
The ochd expander is a 4HP companion module for Wilson the Instruo ochd, designed to connect directly to the ochd via a rear ribbon header. It does not function as a standalone module; it depends on ochd's internal LFO cores for all timing and voltage information.
Its main proposition: 16 additional outputs organized into four processing blocks that derive new modulations, triggers, and random voltages from ochd's eight analogue LFOs. The øchd expander provides additional CV outputs for complex modulation without requiring any additional HP beyond its own 4HP footprint.
Despite the increased functionality, the panel remains simple. Labels are printed directly for each function group (TRIG, R²R, etc.), encouraging exploratory patching rather than manual reading. The module is sometimes listed as "øchd expander" or "[ø]4²" in product pages and forums, but both names refer to the same hardware. Combined, ochd adds 24 modulation outputs with its expander to your system.
Expander Functions: Unipolar LFOs and Analogue Diode Logic
The first function block on the expander produces full-wave rectified unipolar LFOs. These take ochd's bipolar triangle outputs, invert the negative portions, and deliver 0 V to approximately 5 V signals. The result is an output that stays positive at all times, ideal for modulating VCA levels, delay feedback, effect wet/dry mix, and any parameter that expects only positive voltage.
Rectification doubles the number of zero crossings compared to the original bipolar waveform. In practice, this means the perceived speed of the modulation is twice as fast, with a bouncing, pulsing quality that differs from the smooth rise-and-fall of the original triangle.
The second function block implements analogue diode logic. Two pairs of outputs provide analog minimum (whichever input voltage is lowest at a given moment) and analog maximum (whichever is highest). These produce odd squares of combined modulation, effectively creating complex wave shape combinations based on the interplay of two or more LFO rates.
Practical patch ideas: feed two LFOs of different speeds into the minimum logic block and use the output on a bass VCA. The result is pseudo-sidechain movement where the volume dips whenever either LFO swings low. Or use the maximum output to drive a filter cutoff, creating dynamic filter sweeps that exaggerate whenever either modulation peaks. These outputs are perfect for users who want richer, more unpredictable modulation shapes without reaching for extra function generators.
Expander Functions: Cascaded Triggers and Random Voltages
The cascaded stochastic trigger outputs generate irregular but musically plausible gate bursts derived from ochd's internal LFO cycles. Faster LFOs produce triggers more frequently; slower ones generate sparser events. The cascaded structure links these triggers so that faster events can influence or gate slower ones, creating nested rhythms that feel related rather than fully random. These are useful for percussion accents, external gates for envelope triggers, or event-driven modulation in generative patches.
The R-2R 4-bit random voltage source steps through 16 discrete voltage levels, creating "steppy" modulation that resembles slow noise. The rate of change tracks ochd's global speed, so faster LFO settings produce faster random steps. This eliminates the need for a dedicated random module in many cases.
Creative uses include driving chord selection on a quantizer, controlling envelope decay lengths, varying granular sample position, or feeding a sequential switch for ranging use across timbral presets. DivKid HQ Richard Devine and other artists in the modular community have demonstrated these kinds of evolving, semi-random compositions using the expander's outputs.
Workflow and User Experience: ochd + Expander as Global Modulation Ecosystem
Day-to-day, ochd functions as the "always on" background modulation source. One long-term user on ModularGrid reported using it in roughly 60% of their patches, sometimes pulling just two or three outputs, other times using five or six simultaneously. The ochd expander serves as the extra layer of triggers, logic shapes, and random variations that turn simple modulation into a more modulation dense ecosystem.
Ergonomically, the pair spans 8HP with a vertical jack arrangement (faster LFOs at the top, slowest arranged at the bottom). Jack spacing is tight but readable during live performance patching. The intuitive easy layout means you can grab a cable, look at the LEDs, and patch by feel.
Together, the modules offer up to 24 modulation outputs: 8 original LFOs plus 16 derived outputs covering unipolar waves, logic combinations, triggers, and stepped random voltages. This supports an improvisational, cable-first workflow with minimal parameter management.
Compared to a digital modulation hub with screens and presets, this combo is entirely "what you see is what you get." Every output is always active, always accessible, and always producing voltage. No page scrolling, no saved states, no firmware updates. The analogue character means outputs organically change with temperature and time, which users in ambient and drone contexts consider an advantage rather than a flaw.
System Integration: Small Cases, Large Rigs, and Genre Use-Cases
Small cases (48HP to 60HP): The ochd alone replaces several single LFO modules. Eight analogue LFO's in 4HP frees space for sound sources while providing enough modulation to keep patches interesting. Power draw is the main consideration at 80 mA per rail, but most skiff power supplies handle this comfortably.
Mid-sized rigs (6U, 84HP): Adding the ochd expander makes the pair a central modulation engine. Feed filter cutoffs, oscillator FM depth, FX sends, and sequencer parameters from different outputs. The expander's triggers can clock delay units or fire envelope generators. For a second eurorack module investment, the expander extends what ochd can do without duplicating its core function.
Larger systems (9U and beyond): In big rigs, ochd handles slow background motion while dedicated envelope generators and function generators manage foreground articulation. The diversity of 24 outputs supports generative ambient patches, cinematic scoring sessions, and experimental noise performances where continuous, non-repeating modulation is essential.
Genre-specific applications break down clearly:
Ambient / drone: Slowest LFOs modulate reverb tails, spectral effects, and feedback loops over minutes. Free running LFOs ensure the texture never loops.
Techno: Faster outputs and expander triggers add rhythmic movement to percussion FX, gating, and delay sends.
Experimental / generative: R-2R random outputs feed quantizers for pitch selection. Self-patching produces complex wave interactions. The amazing line between order and chaos sits right in ochd's sweet spot.
Comparison and Value: Why Choose Instruo ochd and Its Expander?
Modulation density per HP is the strongest argument for ochd. Eight analogue LFOs in 4HP is hard to match. With the expander, you reach 24 total outputs in 8HP. A comparable setup built from individual dual-LFO modules, a logic module, a trigger generator, and a random source would consume 20HP or more and cost two to three times as much.
Price positioning varies by region. The ochd typically falls in the €150 to €170 range in Europe and $180 to $220 in the US. The ochd expander sits around €97 to $117 depending on retailer. Combined, the pair costs less than many single digital modulation modules that occupy similar or greater rack space.
Build quality supports long-term use. The analogue LFO cores are factory-calibrated, panel printing is precise, and the jacks hold cables firmly. The module is designed for touring and daily studio use.
Unlike menu-driven digital modulation hubs, ochd and its expander have a shallow learning curve. Most users patch effectively within minutes of installation. There are no presets to learn, no pages to scroll, and no firmware to update. For anyone who frequently runs out of LFOs or wants more life in otherwise static patches without burning lots of HP, the Instruo ochd and the ochd expander are strong, future-proof investments.
Practical Tips, Quirks, and Best Practices
Gain staging: ochd outputs swing bipolar, typically several volts in each direction. Some destination modules prefer attenuated or offset signals. Use the expander's unipolar outputs when feeding VCAs, effect mix controls, or anything that behaves badly with negative voltage.
Creative CV routing: Patch envelopes, random sources, or performance sliders into the attenuverter to morph overall modulation speed during transitions. A slow envelope into the CV input creates gradual build-ups; a fast random source creates chaotic speed variation. Negative CV to stall the oscillator cores creates freeze effects useful for transitions.
Tuning to tempo: While ochd is free running and unsynchronised, you can roughly align one LFO's period with a bar or phrase length by ear. Set the rate control so a mid-range output pulses at approximately your tempo, then let the other outputs provide related but offset motion. Control frequencies running at nearby rates create musical phasing.
Analogue quirks: Expect slight rate drift over temperature changes or after power-on. These are inherent to analogue circuits and are part of the module's organic character. The LFOs were tuned by ear for musically satisfying spread rather than precise mathematical ratios.
Output organization: With up to 24 outputs available, labeling helps. Assign roles mentally or physically:
Top ochd outputs → voice modulation (filter, pitch, PWM)
Mid outputs → effect parameters (delay time, reverb mix)
Bottom outputs → slow structural changes (sequence selection, clock division)
Expander triggers → percussion accents, envelope firing
R-2R outputs → random pitch or timbre selection
FAQ
Does ochd need calibration or special maintenance?
The ochd ships factory-calibrated and requires no user calibration under normal conditions. Standard Eurorack maintenance applies: keep power stable, avoid dust ingress, and check that the ribbon cable is correctly seated with red stripe alignment. If you notice outputs behaving erratically or going silent, contact Instruo or an authorised service centre. A small number of users have reported output failures over time, but these cases appear uncommon relative to the installed base.
Can I synchronise ochd's LFOs to a master clock?
The øchd's analogue LFOs are intentionally free running and cannot hard-sync to a clock. You can approximate tempo-related behavior by adjusting the global frequency knob by ear, using clock-derived CV to nudge the bank's speed, or combining ochd with external clocked modulators and VCAs that impose rhythmic structure on top of the continuous LFO movement.
Is the ochd expander compatible with other LFO modules?
The ochd expander is designed exclusively for the Instruo ochd. It connects via an internal header on the ochd's circuit board and draws its signal directly from the ochd's LFO cores. It cannot be paired with other brands' LFO modules or function generators.
Can I use ochd's outputs as slow pitch modulation for melodic parts?
Yes, but with care. Patch an ochd output through an attenuator or precision adder to control depth precisely. At low depth settings, it produces gentle vibrato or slow pitch bends that sound natural. Avoid high modulation depth on quantised melodic lines, as the continuous triangle wave will pull pitch between quantised steps, causing audible detuning.
Is ochd suitable as my first modulation source in a beginner system?
The ochd is an excellent first or second eurorack module for modulation because it is intuitive, easy to understand, and covers many roles at once with its eight outputs. It remains useful as a system grows into larger systems. Beginners should still plan to add at least one envelope or function generator for per-note articulation, since ochd provides only continuous LFO modulation, not triggered envelopes.
